Secure Mode for NetGear API⚓

Overview⚓

Secure Mode provides easy access to powerful, smart & secure ZeroMQ's Security Layers in NetGear API that enables strong encryption on data, and unbreakable authentication between the Server and the Client with the help of custom Certificates/keys and brings cheap, standardized privacy and authentication for distributed systems over the network.

Secure Mode uses a new wire protocol, ZMTP 3.0 that adds a security handshake to all ZeroMQ connections and a new security protocol, CurveZMQ, that implements "perfect forward security" between two ZeroMQ peers over a TCP connection.

Secure Mode can be easily activated in NetGear API through secure_mode attribute of its options dictionary parameter, during initialization. Furthermore, for managing this mode, NetGear API provides additional custom_cert_location & overwrite_cert like attribute too.

Supported ZMQ Security Layers⚓

Secure mode supports the two most powerful ZMQ security layers:

• Stonehouse: which switches to the CURVE security protocol that provides strong encryption on data, and almost unbreakable authentication. Stonehouse is the minimum you would use over public networks and assures clients that they are speaking to an authentic server while allowing any client to connect. This security layer is less secure but at the same time faster than IronHouse security mechanism.

• Ironhouse: which further extends Stonehouse layer with client public key authentication. This is the strongest security model present in ZeroMQ, protecting against every attack we know about except end-point attacks. This security layer enhanced security comes at a price of additional latency.

Features⚓

• Supports the two most powerful ZMQ security layers: StoneHouse & IronHouse.

• Auto-generates, auto-validates & auto-stores the required Public+Secret Keypairs safely.

• Compatible with all messaging pattern, primary and exclusive modes.

• Strong data encryption & Unbreakable authentication.

• Able to protect against many man-in-the-middle (MITM) attacks.

• Minimum hassle and very easy to enable and integrate.

Exclusive Attributes⚓

For implementing Secure Mode, NetGear API currently provide following exclusive attribute for its options dictionary parameter:

• secure_mode (integer) : This attribute activates and sets the ZMQ security Mechanism. Its possible values are: 1(StoneHouse) & 2(IronHouse), and its default value is 0(Grassland(no security)). Its usage is as follows:

  #activates IronHouse Security Mechanism
  options = {'secure_mode':2}
  

• custom_cert_location (string): This attribute sets a custom location/path to directory to generate/store Public+Secret Keypair/Certificates for enabling encryption. This attribute will force NetGear to create .vidgear folder (only if not available) at the assigned custom path (instead of home directory), and then use that directory for storing new Keypairs/Certificates. It can be used as follows:

  # set custom Keypair location to '/home/foo/foo1/foo2'
  options = {
      "secure_mode": 2,
      "custom_cert_location": "/home/foo/foo1/foo2",
  } 
  

• overwrite_cert (bool): [For Server-end only] This attribute sets whether to overwrite existing Public+Secret Keypair/Certificates and re-generate new ones, to protect against any potential security breach. If set to True a new Keypair/Certificates will be generated during NetGear initialization in place of old ones. Its usage is as follows:

  overwrite_cert parameter is disabled for Client's end!

  # a new Keypair will be generated
  options = {"secure_mode": 2, "overwrite_cert": True} 
  

Usage Examples⚓

Bare-Minimum Usage⚓

Following is the bare-minimum code you need to get started with Secure Mode in NetGear API:

Server's End⚓

Open your favorite terminal and execute the following python code:

# import required libraries
from vidgear.gears import VideoGear
from vidgear.gears import NetGear

# open any valid video stream(for e.g `test.mp4` file)
stream = VideoGear(source="test.mp4").start()

# activate StoneHouse security mechanism
options = {"secure_mode": 1}

# Define NetGear Server with defined parameters
server = NetGear(pattern=1, logging=True, **options)

# loop over until KeyBoard Interrupted
while True:

    try:
        # read frames from stream
        frame = stream.read()

        # check for frame if Nonetype
        if frame is None:
            break

        # {do something with the frame here}

        # send frame to server
        server.send(frame)

    except KeyboardInterrupt:
        break

# safely close video stream
stream.stop()

# safely close server
server.close()

Client's End⚓

Then open another terminal on the same system and execute the following python code and see the output:

# import required libraries
from vidgear.gears import NetGear
import cv2

# activate StoneHouse security mechanism
options = {"secure_mode": 1}

# define NetGear Client with `receive_mode = True` and defined parameter
client = NetGear(pattern=1, receive_mode=True, logging=True, **options)

# loop over
while True:

    # receive frames from network
    frame = client.recv()

    # check for received frame if Nonetype
    if frame is None:
        break

    # {do something with the frame here}

    # Show output window
    cv2.imshow("Output Frame", frame)

    # check for 'q' key if pressed
    key = cv2.waitKey(1) & 0xFF
    if key == ord("q"):
        break

# close output window
cv2.destroyAllWindows()

# safely close client
client.close()

Using Secure Mode with Variable Parameters⚓

Client's End⚓

Open a terminal on Client System (where you want to display the input frames received from the Server) and execute the following python code:

# import required libraries
from vidgear.gears import NetGear
import cv2

# activate IronHouse security mechanism
options = {"secure_mode": 2}

# Define NetGear Client at given IP address and define parameters 
# !!! change following IP address '192.168.x.xxx' with yours !!!
client = NetGear(
    address="192.168.x.xxx",
    port="5454",
    protocol="tcp",
    pattern=2,
    receive_mode=True,
    logging=True,
    **options
)

# loop over
while True:

    # receive frames from network
    frame = client.recv()

    # check for received frame if Nonetype
    if frame is None:
        break

    # {do something with the frame here}

    # Show output window
    cv2.imshow("Output Frame", frame)

    # check for 'q' key if pressed
    key = cv2.waitKey(1) & 0xFF
    if key == ord("q"):
        break

# close output window
cv2.destroyAllWindows()

# safely close client
client.close()

Server's End⚓

Now, Open the terminal on another Server System (with a webcam connected to it at index 0), and execute the following python code:

# import required libraries
from vidgear.gears import VideoGear
from vidgear.gears import NetGear

# activate IronHouse security mechanism, and 
# [BEWARE!!!] generating new Keypairs for this example !!!
options = {"secure_mode": 2, "overwrite_cert": True}

# Open live video stream on webcam at first index(i.e. 0) device
stream = VideoGear(source=0).start()

# Define NetGear server at given IP address and define parameters 
# !!! change following IP address '192.168.x.xxx' with client's IP address !!!
server = NetGear(
    address="192.168.x.xxx",
    port="5454",
    protocol="tcp",
    pattern=2,
    logging=True,
    **options
)

# loop over until KeyBoard Interrupted
while True:

    try:
        # read frames from stream
        frame = stream.read()

        # check for frame if Nonetype
        if frame is None:
            break

        # {do something with the frame here}

        # send frame to server
        server.send(frame)

    except KeyboardInterrupt:
        break

# safely close video stream
stream.stop()

# safely close server
server.close()